Mouse and appearance problems

Report crashes, strange behaviour, or apparent bugs
coppelia
Site Admin
Posts: 7150
Joined: 14 Dec 2012, 00:25

Re: Mouse and appearance problems

Post by coppelia » 14 Oct 2014, 22:08

at the very left hand side of the horizontal toolbar, there is a handle. Grab it and drag it somewhere else.

Cheers

Elez
Posts: 32
Joined: 11 Oct 2014, 17:29

Re: Mouse and appearance problems

Post by Elez » 15 Oct 2014, 09:07

Nothing changes :(
I think that if there's no a mayor improvement in 3.1.3, I'll work on 3.0.5 as it seems to work fine.

Elez
Posts: 32
Joined: 11 Oct 2014, 17:29

Re: Mouse and appearance problems

Post by Elez » 23 Feb 2015, 16:52

Hello again!!

I've just try using the very new V-REP version 3.2.0 (rev. 4), but as you can see my problem persists. I have checked my graphic card drivers and I've updated them. I would appreciate your help because I'm at a loss here...

Image

Regards,
Elez

coppelia
Site Admin
Posts: 7150
Joined: 14 Dec 2012, 00:25

Re: Mouse and appearance problems

Post by coppelia » 24 Feb 2015, 08:42

Elez,

the only thing you can do is related to your graphic card or OS. This means, either:
  • update to the newest driver, or try a different (e.g. older) driver
  • try to turn one of the two graphic chips on/off, if you have two.
  • try to change settings of your graphic chip/driver. E.g. disable hardware acceleration, etc.
  • install all service packs/updates that are available for your platform.
Cheers

Elez
Posts: 32
Joined: 11 Oct 2014, 17:29

Re: Mouse and appearance problems

Post by Elez » 24 Feb 2015, 12:50

First of all thanks for all your help,

But unfortunately I've tried all what you recommend and nothing works. I have drivers updated, I only have one graphic card, I have hardware aceleration disabled and I have checked windows update.
As version 3.0.5 seems to render fine, I would have to use that version. In order to that I would like to get the user manual. Where can I find the 3.0.5 User Manual? If I take a look here http://www.coppeliarobotics.com/resources.html I only find the manual for the last version.

Thanks a lot,
Elez

Eric
Posts: 186
Joined: 11 Feb 2013, 16:39

Re: Mouse and appearance problems

Post by Eric » 24 Feb 2015, 13:27

HI!

The user manual is embedded to each version .. check in V-REP-> help->help topics

cheers

Eric

coppelia
Site Admin
Posts: 7150
Joined: 14 Dec 2012, 00:25

Re: Mouse and appearance problems

Post by coppelia » 24 Feb 2015, 19:29

Elez,

have you tried to remove the toolbars? How does the window look then?

Cheers

Elez
Posts: 32
Joined: 11 Oct 2014, 17:29

Re: Mouse and appearance problems

Post by Elez » 25 Feb 2015, 17:54

Yes I've tried it and nothing changes, the black strips continue there...

Regards,
Elez

coppelia
Site Admin
Posts: 7150
Joined: 14 Dec 2012, 00:25

Re: Mouse and appearance problems

Post by coppelia » 26 Feb 2015, 09:15

Is the black area in that case only at the top, or also on the left hand side?
Does it make a difference (e.g. the black area gets smaller?) if you disable the status bar at the bottom? (you can disable it in the file system/usrset, by setting statusbarInitiallyVisible to false).

Cheers

Elez
Posts: 32
Joined: 11 Oct 2014, 17:29

Re: Mouse and appearance problems

Post by Elez » 26 Feb 2015, 16:07

Here's how it looks if I move both toolbars (the black area is also on the left hand side):
Image
And here's how it looks when I set to false statusbarInitiallyVisible on the usrset:
Image
Regards,
Elez

Post Reply